5 Optional Part Installation
NOTE
l Before performing operations in this chapter, make sure that optional parts to be installed are
available and compatible. Use the Intelligent Computing Compatibility Checker to check parts
compatibility.
l After parts replacement, upgrade the software, firmware, and CPLDs of the new components to
either the version in the customer environment (recommended) or to the latest version. For details,
see the TaiShan Rack Server Upgrade Guide.
l After parts replacement, restore component configurations (including iBMC, BIOS, and RAID) on
the customer live network.
5.1 Precautions
5.2 Front Bezel (Optional)
5.3 Drive
5.4 AC PSU
5.5 PCIe Card on a Riser Card
5.6 Screw-in RAID Controller Card
5.7 Supercapacitor
5.8 DIMM
5.9 FlexIO
5.10 Rear Drive Module
5.1 Precautions
l Read relevant installation procedures before installing multiple components to streamline
identical steps.
l Wait until overheating devices have cooled down before touching them to avoid injury.
l Properly ground the server before installation to avoid damage to electronic components
from electrostatic discharge.
TaiShan 2280 V2 Server
User Guide
5 Optional Part Installation
Issue 01 (2019-07-01) Copyright © Huawei Technologies Co., Ltd. 83
To Next Page
Loading...
Need help?
General