Step Action
Configure RAID. Configure RAID for the server. For details, see the TaiShan
Server RAID Controller Card User Guide.
Configure the BIOS. Configure the server BIOS, including setting the boot option
priority and BIOS password.
Install an OS. Install an OS for the server.
4.6.3 Querying the Management Network Port IP Address
Methods
You can obtain the IP address using any of the following methods:
l Obtain the default IP address.
l Use the iBMC WebUI.
l Use the BIOS. For details, see this topic.
l Log in to the iBMC CLI through the serial port, and run the ipmcget -d ipinfo to query
the IP address of the management network port. For details, see TaiShan Rack Server
iBMC User Guide.
Default IP Address
The default IP address of the iBMC management network port is 192.168.2.100.
Procedure
Step 1 Connect a USB mouse and keyboard.
Step 2 Connect a monitor via VGA cable.
Step 3 Restart the OS.
Step 4 When the screen shown in Figure 4-13 is displayed, press Delete or F4 to enter the BIOS
Setup screen.
TaiShan 2280 V2 Server
User Guide
4 Setup
Issue 01 (2019-07-01) Copyright © Huawei Technologies Co., Ltd. 68
To Next Page
Loading...
Need help?
General