Figure 4-25 Boot screen
NOTE
The TaiShan servers support only the UEFI boot mode. The boot mode is still UEFI even if you run the
IPMI command to switch to the legacy mode successfully.
Step 2 Select Boot Type Order and press Enter.
The Boot Type Order screen is displayed.
NOTE
The default boot sequence is Hard Disk Drive > CD or DVD-ROM Drive > PXE > Others.
Step 3 Select a boot option and press "+" or "-" to change the boot order.
l Press "+" to move a boot option up.
l Press "-" to move a boot option down.
NOTE
The server will boot in the order displayed.
Step 4 Press F10.
The Save Configuration&Exit dialog box is displayed.
Step 5 Select Yes and press Enter.
----End
Set the BIOS password
Step 1 Press ← or → to select the Security menu, as shown in Figure 4-26.
TaiShan 2280 V2 Server
User Guide
4 Setup
Issue 01 (2019-07-01) Copyright © Huawei Technologies Co., Ltd. 81
To Next Page
Loading...
