Hypertherm XPR300 Replacement Part Procedures

Parts List
5
158 809970 Instruction Manual XPR300
Hydrogen or nitrogen-hydrogen (F5) (red)
Fittings: LH type “B” female
Water (optional shield fluid) (blue)
Fittings: JIC-6 female
Preventive maintenance kits
Part number Length Part number Length
124036 3 m (9.8 feet) 124042 25 m (82 feet)
124037 4.5 m (14.8 feet) 124043 35 m (114.8 feet)
124038 7.5 m (24.6 feet) 124044 45 m (147.6 feet)
124039 10 m (32.8 feet) 124045 60 m (196.9 feet)
124040 15 m (49.2 feet) 124046 75 m (246.1 feet)
124041 20 m (65.6 feet) – –
Part number Length Part number Length
124047 3 m (9.8 feet) 124053 25 m (82 feet)
124048 4.5 m (14.8 feet) 124054 35 m (114.8 feet)
124049 7.5 m (24.6 feet) 124055 45 m (147.6 feet)
124050 10 m (32.8 feet) 124056 60 m (196.9 feet)
124051 15 m (49.2 feet) 124057 75 m (246.1 feet)
124052 20 m (65.6 feet) – –
Part number Length
428639 Kit: Filter, torch rebuild without coolant
428640 Kit: Filter, torch rebuild with coolant
428641 Kit: Electronics (200 V – 240 V)
428642 Kit: Electronics (380 V – 600 V)

Hypertherm XPR300 Specifications

General

Cutting Current	300 A
Duty Cycle	100% at 300 A
Technology	X-Definition Plasma
Gas Supply	Oxygen, Nitrogen, Air
Cutting Capacity (Mild Steel)	38 mm (1.5 in)
Severance Capacity (Mild Steel)	75 mm (3 in)
Pierce Capacity (Mild Steel)	50 mm (2 in)
Input Voltage	200–480 V, 3-PH, 50/60 Hz