Table 15. MAP 0190: Forms Feed Problems (continued)
Step Questions/Actions Yes No
6.
Check for damage to the inner forms guide surface or to
the hinges on the inner forms guide.
Is the inner forms guide OK?
Go to step 7 on page 107. Repair, as needed.
Run T&D in automatic mode to
verify correct printer operation.
For Model A00, see “How To Run
the Test and Diagnostic (T&D)
Programs” on page 161. For
Models 001, 002, or 003, see
“How To Run the Test and
Diagnostic (T&D) Programs” on
page 201.
Continue with step 7 on
page 107.
Chapter 1. Diagnosing Problems
106
To Next Page
Loading...
Need help?
General