Table 4. MAP 0120: Attachment, Model A00 (continued)
Step Questions/Actions Yes No
c. Ensure that cable length restrictions are not
exceeded. Refer to the signal cable ordering information
in the
IBM 4247 Printer Model A00 User’s Guide
(SA24-4404) for attachment cable configurations.
Is the problem fixed?
Run T&D in Automatic Mode to
verify correct printer operation.
See “How To Run the Test and
Diagnostic (T&D) Programs” on
page 161 for Model A00. For
Model 003, see “How To Run
the Test and Diagnostic (T&D)
Programs” on page 201.
Go to step 2.
2.
Is the failure with the serial attachment? Go to step 3 on page 38. Go to step 6 on page 40.
Chapter 1. Diagnosing Problems
37
To Next Page
Loading...
Need help?
General