Table 8. MAP 0130: No Paper Movement (continued)
Step Questions/Actions Yes No
2. a. Use T&D11 to determine if the paper feed motor
pulley turns. Sensor tuning uses the paper feed
motor to engage and disengage the platen pinch
rollers.
b. Remove the front tractor assembly (if installed).
c. Run T&D11 and observe the paper feed motor
pulley. For Model A00, see “How To Run the Test
and Diagnostic (T&D) Programs” on page 161. For
Models 001, 002, or 003, see “How To Run the Test
and Diagnostic (T&D) Programs” on page 201.
When you ran T&D11, did the paper feed motor
pulley turn?
Go to step 3 on page 64. Go to step 4 on page 65.
Chapter 1. Diagnosing Problems
63
To Next Page
Loading...
