IBM 4247

Table 8. MAP 0130: No Paper Movement (continued)
Step Questions/Actions Yes No
3.
Perform the tractor assembly service check. Go to
“Tractor Assembly Service Check” on page 325
Is the service check OK?
Install a new tractor assembly in
the failing position (Front or
Rear).
-or-
Install a new logic board. For
Model A00, see “Logic Board -
Model A00” on page 370. For
Models 001 and 002 see “Logic
Board - Models 001 and 002” on
page 378. Or “Logic Board -
Model 003” on page 366.
-or-
Install a new tractor assembly
cable. Run T&D in automatic
mode to verify correct printer
operation. For Model A00, see
“How To Run the Test and
Diagnostic (T&D) Programs” on
page 161. For Models 001, 002,
or 003, see “How To Run the
Test and Diagnostic (T&D)
Programs” on page 201.
Repair as needed.
Run T&D in automatic mode to
verify correct printer operation.
For Model A00, see “How To
Run the Test and Diagnostic
(T&D) Programs” on page 161.
For Models 001, 002, or 003,
see “How To Run the Test and
Diagnostic (T&D) Programs” on
page 201.
Chapter 1. Diagnosing Problems
64