IBM DS3500 - Page 223

Chapter 8. Administration - Subsystem Management 199
Draft Document for Review March 28, 2011 12:24 pm 7914Admin_Subsystem.fm
Figure 8-6 Automatic configuration
Detailed description of automatic configuration of unconfigured disk drives on DS3500
Storage Subsystem is in 12.6.1, “Automatic configuration” on page 310.
Save Configuration
Use the Storage Subsystem  Configuration  Save Configuration option (Figure 8-7
on page 200) to save the logical configuration settings of a storage subsystem to a script file.
Later, you can select Tools  Load Storage Subsystem Configuration in the Enterprise
Management window to copy the configuration data back from the saved file to a storage
subsystem with the same hardware configuration. For more information about the Load
Storage Subsystem Configuration option, refer to Chapter 6, “Administration - Enterprise
Management” on page 161.