7914Admin_Setup.fm Draft Document for Review March 28, 2011 12:24 pm
310 IBM System Storage DS3500: Introduction and Implementation Guide
Figure 12-6 Configuration task
This wizard has three options:
12.6.1, “Automatic configuration” on page 310
12.6.2, “Configure hot spare drives” on page 313
12.6.3, “Create arrays and logical drives” on page 313
Select required option and click OK.
12.6.1 Automatic configuration
If the Automatic configuration option is selected, a new window with introduction for automatic
configuration opens, which recommends the use of dedicated options to create well tuned
logical drives. Click Next and window like in Figure 12-7 on page 311 opens.
Note: If your storage subsystem contains drives with different media types and different
interface types, or has no unassigned drives available for configuration, the Automatic
Configuration window does not appear.
To Next Page
Loading...
Need help?
General