IBM DS3500 Introduction And Implementation Guide

Chapter 19. Microsoft Cluster configuration with DS3500 589
Draft Document for Review March 28, 2011 12:24 pm Microsoft Cluster configuration with DS3500.fm
19.4.4 Quorum configuration
In the following we will configure the quorum options, add the second node and configure the
first cluster resources.
Follow the steps to complete the tasks.
1. Add a Disk by selecting the Storage in Failover Cluster Management window as shown
in Figure 19-19
Figure 19-19 Add a Disk
2. Select the Available Disk resources to add to the cluster as shown in Figure 19-20 on
page 590 and click OK to launch the summary window as shown in Figure 19-21 on
page 590

IBM DS3500 Specifications

General

Brand	IBM
Model	DS3500
Category	Storage
Language	English