Chapter 8. Administration - Subsystem Management  211
Draft Document for Review March 28, 2011 12:24 pm 7914Admin_Subsystem.fm
Figure 8-25   Set Password
If you have forgotten the current password, contact your IBM Customer Support 
Representative. If a password was not set previously (You have got a new subsystem), the 
current password is not required to establish a new password.
If the inactivity time-out is not set to âNeverâ, the window as in Figure 8-26 will open after 
defined period of inactivity time. How to set the inactivity time-out is described in âTime-out 
Settingâ on page 207.
Figure 8-26   Re-enter password
8.2.2  View Menu
This pull down menu (Figure 8-27) can be used for four relatively independent types of task.
Figure 8-27   View Menu
View menu items can be used:
1. For customizing the basic Storage Subsystem Manger window:
By selecting menu item View ďŽ Toolbar and View ďŽ Status Bar, you can hide or show 
these two areas in Storage Manger window. Visibility of these bars is indicated by the 
check mark on the left side of these two menu items.