Chapter 15. Disk Security with Full Disk Encryption drives 465
Draft Document for Review March 28, 2011 12:24 pm 7914FDE.fm
15.3.3 Enable Disk Security on array
Now that the keys have been created, Disk Security can now be enabled on the array.
Right-click the array and select Secure Drives, as shown in Figure 15-15.
Figure 15-15 Secure all drives in the array
You will then be prompted to confirm the Secure Drives on the array, as shown in
Figure 15-16.
Figure 15-16 Confirm Array Drive Security
To Next Page
Loading...
