INDEX
OpenNet Controller User’s Manual iii
up/down selection reversible 7-13
CPU
module 2-1
specifications 2-5
modules A-3
crimping tool 3-10, 25-5, 26-6
CVXTY 19-2
CVYTX 19-3
cycle time 24-12
D D/A converter 2-31
data
combine 14-14
communication between remote I/O master and slave
stations 24-3
comparison instructions 10-1
conversion instructions 14-1
divide 14-13
input 7-20
mapping 24-5
type 8-3, 26-23
types for advanced instructions 8-4
data link
communication 21-1
error 21-4
error code 21-4
error M8005 6-9, 21-6
initialize flag M8007 6-9, 21-6
prohibit flag M8006 6-9, 21-6
stop flag M8007 6-9, 21-6
connection error 27-4
master station processing A-2
mode 2-2
system 1-6
tab 21-7
wiring 3-7
with other equipment 21-12
data rate 25-4, 25-6
data register
allocation for transmit/receive data 21-3
comparison instructions 7-18
data registers
and link registers double-word
data move 9-2
operands 8-5
for modem mode 23-3
DC= and DC≥ instructions 7-18
DEC 11-9
decimal values and hexadecimal storage 8-4
decrement 11-9
jump non-zero 18-5
defined network variables 26-23
destination operand 8-3
device
level 24-6
numbers 21-2, 22-2
DeviceNet 25-1
cable 25-4
slave module 2-38
DGRD 16-3
dialing 23-2
telephone number 23-5
digital
I/O module operands 6-18
read 16-3
dimensions 2-40
DIN rail 3-3
DIP switch settings 25-6
direct control action 20-10
disabling protection 5-18
disassembling modules 3-3
disconnect
line 23-2
mode 23-2, 23-6
discontinuity of operand areas 8-5
DISP 16-1
disparity, run/stop operation upon 5-5
display 16-1
DIV 11-1
division 11-1
DJNZ 18-5
double-word
data move in data registers and link registers 9-2
operands in data registers and link registers 8-5
download program 4-6, 5-19
DSR input control signal option D8205/D8305 17-28
DTCB 14-14
DTDV 14-13
DTR output control signal option D8206/D8306 17-29
dual-pulse reversible counter CDP 7-12
E edit user program 4-4
enabling protection 5-18
END
instruction 7-28
processing time, breakdown A-2
end
delimiter 17-17
plate 2-3
error
causes and actions 27-4
code
data link communication 21-4
general 27-3
general bus error 24-16
INTERBUS 24-16
INTERBUS master 24-10
remote/local bus errors 24-22
user errors 24-16
user program execution 27-6
data 25-7, 26-17
location INTERBUS master 24-10
ERROR LED 27-1
during errors 27-4
ESD 2-37
exchange 9-13
exclusive OR word 12-1
execution times for instructions A-1
expansion
connector 2-3
module ID 26-17
power supply module 2-34, A-3
system 1-6
external interface file 26-2, 26-12
F ferrule 3-10, 25-5, 26-6
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
To Next Page
Loading...
Need help?
General
