IDEC OpenNet series User Manual

2: MODULE SPECIFICATIONS
2-16 OPENNET CONTROLLER USER’S MANUAL
Output Module
Digital output modules are available in 16-point relay output modules, 16- and 32-point transistor sink output modules,
and 16-point transistor protect source output modules. Five different connector/terminal styles are available.
Output Module Type Numbers
Parts Description
(1) Module ID Indicates the output module ID.
Ry OUT: Relay output, 16 points
Tr OUT: Transistor output, 16 or 32 points
(2) Status LED Turns on when output is on.
(3) Terminal Block Cover The terminal block cover flips open to the right.
When using long ferrules for wiring, the terminal block cover may be removed.
(4) Cable Terminal/Connector Six different connector/terminal styles are available
(5) Terminal Label Indicates terminal numbers 1 through 20 on the terminal block.
(6) Expansion Connector Connects to CPU and other modules.
Module Name
16-point
Relay Output
16-point Transistor
Sink Output
16-point Transistor
Protect Source Output
32-point Transistor
Sink Output
Screw Terminal FC3A-R161 FC3A-T16K1 FC3A-T16P1 —
Nylon Connector
FC3A-R162 ———
— FC3A-T16K3 ——
—— —FC3A-T32K4
Fujitsu Connector —— —FC3A-T32K5
(6) Expansion Connector
(1) Module ID
(2) Status LED
(3) Terminal Block Cover
(4) Cable Terminal/Connector
(5) Terminal Label
This figure illustrates a screw terminal type output module.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com

IDEC OpenNet series Specifications

General

Brand	IDEC
Model	OpenNet series
Category	Controller
Language	English