WSB-9152 PICMG 1.0 SBC
Page 118
Î
3F8/IRQ4 DEFAULT
Serial Port 1 I/O port address is 3F8 and the interrupt
address is IRQ4
Î
3E8/IRQ4
Serial Port 1 I/O port address is 3E8 and the interrupt
address is IRQ4
Î
2E8/IRQ3
Serial Port 1 I/O port address is 2E8 and the interrupt
address is IRQ3
Î Serial Port2 Address [2F8/IRQ3]
Use the Serial Port2 Address option to select the Serial Port 2 base address.
Î
Disabled
No base address is assigned to Serial Port 2
Î
2F8/IRQ3 DEFAULT
Serial Port 2 I/O port address is 3F8 and the interrupt
address is IRQ3
Î
3E8/IRQ4
Serial Port 2 I/O port address is 3E8 and the interrupt
address is IRQ4
Î
2E8/IRQ3
Serial Port 2 I/O port address is 2E8 and the interrupt
address is IRQ3
Î Serial Port2 Mode [Normal]
Use the Serial Port2 Mode option to select the Serial Port2 operational mode.
Î
Normal DEFAULT
Serial Port 2 mode is normal
Î
IrDA
Serial Port 2 mode is IrDA
Î
ASK IR
Serial Port 2 mode is ASK IR
Î Parallel Port Address [Disabled]
Use the Parallel Port Address option to select the parallel port base address.
Î
Disabled
No base address is assigned to the Parallel Port
Î
378 DEFAULT
Parallel Port I/O port address is 378
To Next Page