IEI Technology WSB-9152 - Backplane to Mainboard Connector; Table 4-4: Panel Backlight Connector Pinouts

WSB-9152 PICMG 1.0 SBC
Page 45
PIN NO. DESCRIPTION
1 LCD_BKLCTL
2 GROUND
3 12 V
4 GROUND
5 ENABKL
Table 4-4: Panel Backlight Connector Pinouts
4.2.3 Backplane to Mainboard Connector
CN Label: ATXCTL1
CN Type:
3-pin wafer (1x3)
CN Location:
See
Figure 4-4
CN Pinouts:
See
Table 4-5
The backplane to mainboard connector closes the circuit between the mainboard and the
backplane in which it is installed. The backplane should have an ATX connector and be
powered by an ATX power supply.