WSB-9152 PICMG 1.0 SBC
Page 200
Step 11: The confirmation screen shown in Figure 8-44 allows you to restart the computer
immediately after the installation is complete or to restart the computer later. For
the settings to take effect the computer must be restarted. Once you have
decided when to restart the computer, click the “F
INISH” button.Step 0:
8.9 IDE Controller Installation
To install the IDE controller, please follow the steps below.
Step 1: Open Windows Control Panel (
Figure 8-45).
Figure 8-45: Access Windows Control Panel
To Next Page
Loading...
Need help?
General
