IEI Technology WSB-9152 - Rebuild Mirror Drive

WSB-9152 PICMG 1.0 SBC
Page 161
Step 2: Select the source drive, and then the mirror drive can be rebuilt. The source
drive is the working drive with your data. Step 0:
Figure A-2: Rebuild Mirror Drive
7.8 Rebuild Mirror Drive
If one of the two drives in a RAID 1 array has been replaced, the RAID drive can be rebuilt
without loss of data.
Step 1: Highlight the “Rebuild Mirror Drive” menu option and press ENTER.
Figure A-1: Select “Rebuild Mirror Drive”