IEI Technology WSB-9152 - Super IO Configuration

WSB-9152 PICMG 1.0 SBC
Page 117
 1.2 MB 51/4”
 720 KB 31/2”
 1.44 MB 31/2’ D
EFAULT
 2.88 MB 31/2”
6.3.4 Super IO Configuration
Use the Super IO Configuration menu (BIOS Menu 7) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS Menu 7: Super IO Configuration
Î Serial Port1 Address [3F8/IRQ4]
Use the Serial Port1 Address option to select the Serial Port 1 base address.
Î
Disabled
No base address is assigned to Serial Port 1