WSB-9152 PICMG 1.0 SBC
Page 135
6.5.4 Removable Drives
Use the Removable Drives menu (BIOS Menu 16) to specify the boot sequence of the
available FDDs. When the menu is opened, the FDDs connected to the system are listed
as shown below:
1st Drive [1st FLOPPY DRIVE]
NOTE:
Only the drives connected to the system are shown. For example, if
only one FDD is connected only “1st Drive” is listed.
The boot sequence from the available devices is selected. If the “1st Drive” option is
selected a list of available FDDs is shown. Select the first FDD the system boots from. If
the “1st Drive” is not used for booting this option may be disabled.
To Next Page
Loading...
