5 - ADJUSTMENT AND SETUP Master 80 UP HyperFlexible
EN
5 - Pag. 11 / 11
• Choose an appropriate collet for the bar diameter
and profile; see "GUIDE CHANNELS-BAR PUSHER-
REVOLVING TIPS" and "COLLETS" section.
INFORMATION:
contact IEMCA service department for
further information.
WARNING - CAUTION:
At every collet change (model 381p, 381p..011,
381p..021 e 386p) it is necessary to install the
grub screw H and the counter screw L.
To Next Page
Loading...
