Editing a User Waypoint (continued)
5. Press ENT to save the changes. If the
waypoint is in an inactive flight plan,
the display below appears for
approximately 3 seconds.
WAYPOINT IS IN
AN INACTIVE PLAN
DB
After 3 seconds, or if the waypoint is
not in a flight plan, the display below
appears.
MODIFY USER WPT
PRESS ENT
DB
If a duplicate identifier is entered, the
display below appears for
approximately 3 seconds. The NMC
then returns to the waypoint editing
page so you can change the identifier
using the Small and Large knobs.
DUPLICATE USER
WAYPOINT IDENT
NOT ALLOWED
DB
138
DB Mode Procedures Operations
ENT
To Next Page
Loading...
