established inbound as practical when you want the waypoint to
become the FAF.
Note
Combined IAF/FAF waypoints are identified by the
Apollo NMS as IFAF waypoint types.
Procedure Turn Example 1
This example uses MFR VOR DME or
GPS Rwy 14 procedure with IAF OED
VOR using the OED 157/10 transition
(see point A).
1.At point A, press OBS/HLD to
suspend sequencing.
2. At point B, press DIRECT-TO twice.
Use the Small and Large knobs to
select 153° and then press ENT to
establish an inbound course. Note that
your CDI will “reverse-sense” while
outbound, just like a VOR with
153°-TO selected on the OBS.
3. At point C, make your procedure turn.
4.
243
Operations Approach Procedures
ENT
D
D
To Next Page
Loading...
