At point D, press OBS/HLD to enable
sequencing. Once sequencing is
enabled, OED becomes the FAF and
the NMS will transition to Approach
Active at OED.
5. At point E, the NMS will be in
Approach Active operation.
Procedure Turn Example 2
For this example, use the VOR or GPS-B approach for Wenatchee,
Washington. You will start the approach using the CASHS transition.
Illustration Points
·
Point A - Between CASHS and EAT.
·
Point B - A heading of 105° between EAT and FF285.
·
Point C - Continue on a heading of 105° between FF285 and the
procedure turn until beyond FF285.
·
Point D - Make the procedure turn.
·
Point E - Intercept the 285° inbound to FF285.
1. Point A - A heading of 073° inbound to
EAT.
2.
244
Approach Procedures Operations
To Next Page
Loading...
