Point D (Missed Approach)
1. If you choose a Missed Approach at RW11, cancel the Approach
Active operation by pressing the OBS/HLD button. The CDI
sensitivity will now gradually scale back to Approach Transition
sensitivity (1.0 nm full scale).
2. NEMEW will become the TO waypoint. The inbound course to
NEMEWis alreadythe same asthe approachinbound, so youdo not
need to enter it.
3. NEMEW is the MAHP and will automatically become a holding
waypoint. Verify that the OBS/HLD annunciator is lighted.
Point E (Holding Pattern)
1. After crossing NEMEW, you will be prompted to set the OBS
course. Turn the LARGE and SMALL knobs to select 290° and
press ENTER.
2. Fly the holding pattern. A parallel entry should work well.
279
To Next Page
Loading...
