2. The Altimeter Setting will flash. Turn the Small knob to display the
local barometric pressure and press ENT. Press NAV to return to
NAV mode.
ENTER
LOCAL ALTIMETER
SETTING 29.92¯
Point A (Inbound to OED from the south)
1. Suspend flight plan sequencing at OED to prepare for a procedure
turn. The combined IAF/FAF waypoint is noted on your Apollo
NMS as IFAF. Press the OBS/HLD button.
2. Verify that the Hold annunciator is ON.
Point B (Outbound on the procedure turn)
1. After crossing OED, the To/From flag will indicate FROM. OED
will remain the active waypoint.
2. Select the desired inbound course to OED. Press DIRECT-TO
twice.TurntheLargeandSmallknobstodisplay162°. Press ENT.
OBS DTK: 162°
TO OED
BRG 175 DTK 020
Point C (On the procedure turn)
1. Flyoutbound via the342 radialofOED toexecutea procedureturn. A
distance of 2 to 3 nm outbound is recommended in order to allow
adequate distance for the Apollo NMS to transition to Approach
Active as you pass the FAF inbound.
283
To Next Page
Loading...
