Power-Up Sequence (continued)
The Self-Test introductory page is displayed for 2 seconds.
STARTING
MEMORY
TESTS ...
NAV
The next self-test checks all of the NMC software, and takes about 4
seconds. During this time, the screen shown below is displayed.
Software Test
In Progress
Please Wait
NAV
The next self-test checks the User Waypoint database. If any errors are
found, the affected User Waypoints are cleared from memory, and the
display shown below is displayed until the user presses ENT.Ifno
errors are found, this page is not shown.
User DATABASE
Memory Failure
Press ENT
NAV
Next, all Flight Plan information is checked. If any errors are found,
the affected flight plans are cleared from memory, and the display
shown below is displayed until the user presses ENT. This page is not
shown if no flight plan errors are detected.
Flight Plan
Memory Failure
Press ENT
NAV
16
Power-Up Sequence Operations
To Next Page
Loading...
