Power-Up Sequence (continued)
Remaining user-set-ups are tested next, resulting in the following
message if errors are detected. Again, this message is not shown in the
normal case where no errors are detected.
Memory Test
Failure
Press ENT
NAV
When the test is completed successfully, the following screen is
displayed for 2 seconds.
Software Test
Passed
NAV
Failure to pass the software test indicates a critical system error may
exist. In this case, the following message is displayed and the NMC
will not continue to function. If this problem should occur, return the
NMC to the dealer for repairs.
Software Test
Failed
Contact Dealer
NAV
If a datacard is in the datacard slot, it is tested next. This test checks all
of the datacard memory, taking about 5 seconds to complete. The test
is accompanied by the display shown below.
DATACARD TEST
In Progress
Please Wait...
NAV
When the test is completed successfully, the following screen is
displayed for 2 seconds.
17
Operations Power-Up Sequence
To Next Page
Loading...
