2. Now press DIRECT-TO twice. Select 105’ with the Small knob as
the desired inbound course and press ENT. The CDI will indicate
FROMandwill provideguidanceon the 105°outboundradial asper
missed approach instructions.
OBS DTK: 105°
TO OED
BRG 162 DTK 162
3. When you reach 3900’, begin the climbing right turn.
4. When you reach 4200’ or when your bearing to BO matches your
current heading, press DIRECT-TO and then ENT. This will
establish a new inbound course direct to BO.
NDB BO
USTIK (BOISE)
FACIL ID USA
Point D (Inbound to BO)
Fly inbound on the new direct course to BO. The OBS/HLD
annunciator will remain lighted.
Point E (Missed Approach Hold Point)
As you pass BO, establish the new inbound holding course and enter
the hold. Press DIRECT-TO twice. Select an OBS DTK of 098° with
the Large and Small knobs. Press ENT.
290
To Next Page
Loading...
