Holding At The TO Waypoint
This form of the Arrival Alert is provided when holding at the current
TO waypoint.
Arrival: SLE
Holding
Next Leg Is DME Arc
This form of the Arrival Alert is provided when the next TO waypoint is
the end of a DME arc. Use the DME Arc Assist page in NAV mode. Next
Desired Track and Desired Heading are not provided with this alert.
Arrival: SLE
Next leg DME Arc
Use Arc Assist
TO Waypoint Sequence
When a waypoint sequence occurs and you have not viewed the arrival
alert, one of the following alerts are provided.
Normal Sequence
The alert is only provided if traveling faster than 5 knots. This reduces
the chance of nuisance alerts after power-up. The new waypoint
identifier, bearing, and desired track are provided.
Sequence Alert
New Wpt: SLE
BRG073° DTK069°
DME Arc Sequence
This form of the Sequence Alert is provided when the next TO
waypoint is the end of a DME arc in a nonprecision approach.
Sequence Alert
Next Leg DME Arc
Use Arc Assist
53
Operations Message Displays
To Next Page
Loading...
