4 - 51
4.7.2 Deleting of Testing Operation Relational Data
You have the merit and the demerit as below at acquiring and saving the testing operation
relational data in a Test Definition file.
[Merit]
・ The state at the test completion is to be checked again after the test completion.
・ Excitation operation is to be restarted from the state at excitation completed.
[Demerit]
・ Test Definition contents cannot be changed until the Live Data in Operation is deleted.
< Procedures >
< Step 1 >
Press the button of [Delete button] by selecting Relational Data.
①
②
To Next Page
Loading...