2 - 4
2.2 Installation of Software
This section describes the installation of the K2 software.
The installer of K2 comprises the following three installers shown below
*
.
* K2 application software Ver. 12.0.0.0 and later
1) Application installer
K2 application (application software) and the installation of the driver can be executed.
2) License installer
Information of the license you purchased can be installed.
3) Manual installer
The operation instruction in PDF format can be installed.
Always install them in the following order: 1) License installer, 2) Application installer, 3) Manual
installer.
The manual installer does not need to be executed, if unnecessary.
The installers may be executed before or after the K2 PCI Express I/F board is installed to the PC.
When installing them, log in the Windows as the “User with authority of administrators”.
To Next Page
Loading...