IMV K2 - Initial Output Voltage Default Value; Rating Information; Load from System Model; Control Frequency Range Is Limited

3 - 3
3.3.4 Initial Output Voltage Default Value
(1) Meaning
This item is for setting of a default value for the voltage of the loop check operation at the
beginning of control operation.
This default value can be changed in each application.
Please use a suitable value generally for the excitation system to be used.
3.3.5 Rating Information
(1) Meaning
This item is for setting of maximum rating data (Max. Acceleration, Max. Velocity, Max.
Displacement) of excitation system to be used.
The rating of excitation system varies according to the characteristics of control signals. So,
the specification of this item is for setting the values of each program, such as SINE,
RANDOM, SHOCK independently.
‘HV-SHOCK’ is optional.
3.3.5.1 Load from system model
(1) Meaning
The system rating information is set automatically by selecting a model from the list of
excitation systems provided.
3.3.6 Control Frequency Range is limited
(1) Meaning
This item is for setting of the upper and the lower limit of range for the control objective of the
excitation system to be used.
When this item is set, the reference having the band out of the range set by this item is
controlled in each application.
Please set this item according to the frequency range of the excitation system to be used.
3.3.7 Other Control Quantities
(1) Meaning
This item is for setting of the maximum rating data when the excitation system is to be
controlled by other physical quantity than acceleration, velocity and displacement.
3.3.8 Contact I/O
(1) Meaning
This item is for setting of input/output when an external equipment connects with K2 system at
a contact in a composite test.
Refer to Contact I/O Information about the setting method.