IMV K2 - Polarity; TEDS Access

3 - 7
3.4.7 Polarity
(1) Meaning
This item is for specifying of polarity of input channel to be used.
When this item is set to ‘Negative’, the input signal of input channel is treated as a signal
having the negative polarity. (That is, the data obtained after A/D converting multiplied –1.)
The default value of this item is set to ‘Positive’.
3.4.8 TEDS Access
(1) Meaning
Input sensitivity is captured and automatically set from the connected sensor corresponding
TEDS.
This function is enabled when the input type is IEPE.