IMV K2 - Other Operations

10 - 4
10.2.3 Other Operations
<Open test definition file>
The test definition file of the selected test (test results) can be opened with each application
software.
Two types of operating methods are available.
1) Select and right-click on any item you want to display with a mouse. Then, the
operation menu appears. In the displayed operation menu, select “Open test definition
file”.
2) Select any item you want to display. In the menu bar, select “Edit”, then “Open test
definition file”.
In either operating method, the menu becomes invalid when no applicable test definition file is
found.
<Open graph data file>
The data file of the selected test (test results) can be displayed with DataViewer.
Three types of operating methods are available.
1) Select and right-click on any item you want to display with a mouse. Then, the
operation menu appears. In the displayed operation menu, select “Open graph data
file”.
2) Select any item you want to display. In the menu bar, select “Edit”, then “Open graph
data file”.
3) Double-click on any item you want to display.
In the operating method described in 1) and 2) above, the menu becomes invalid when no
applicable graph data file is found.
<Save graph data file>
The data file of the selected test (test results) can be saved.
Two types of operating methods are available.
1) Select and right-click on any item you want to display with a mouse. Then, the
operation menu appears. In the displayed operation menu, select “Save graph data
file”.
2) Select any item you want to display. In the menu bar, select “Edit”, then “Save graph
data file”.
In either operating method, the menu becomes invalid when no applicable graph data file is
found.
<Save CSV file>
The displayed test history can be saved in CSV file.
1) In the menu bar, select “File”, then “Save CSV file”.