10 - 1
Chapter 10 Test Record
10.1 Outline
In the K2, results of the performed tests are recorded in the test history.
Information to be recorded in the test history is as shown below.
(1) Begin Time: Time when excitation is started
(2) End Time: Time when excitation is ended
(3) Application: Name of application software such as SINE and RANDOM
(4) Type: Type of tests such as SWEEP and SPOT
(5) Name: Test file name
(6) End Status: Status at the end time (Characters are indicated in red in case of abnormal
end)
(7) Test Time: Test time or number of excitation times (in the case of SHOCK)
(8) Version: K2 software version
(9) Caution: Result of judgement of intended use (for details, refer to Chapter 9)
(10) Remarks: Reason for judgment of intended use (in the case of high and middle
results)
When excitation is ended by each application software, the information is recorded in the test history.
Test Record Viewer displays the test history.
In each application software, data files are automatically saved after excitation is ended (*1).
Test Record Viewer also displays these data files and the test definition files.
*1 One thousand latest data files are saved in each application software.
The data capacity to be saved is limited to 1 GB. When the data capacity reaches the upper limit,
data files are deleted in chronological order before the number of files reaches one thousand.
<Securityfunction>
If you do not want to allow all operators to view the test history, use the security function. The
security function checks password when Test Record Viewer is activated. If the input password is
wrong, the function prevents Test Record Viewer from being activated.
In the default of the Test Record Viewer, the security function is valid.
As for the cancellation of the security function, refer to the section of “Security function”.
* Password
We provide a password unique to each of customers. The password cannot be changed by
customers themselves.
The password file is saved in the license installer.
Pay close attention to the handling of the password.
To Next Page
Loading...