IMV K2 - Dedicated Hardware

1 - 9
1.2.2 Dedicated Hardware
(1) Input/Output Module (K2ST-23-011)
<Input>
Analogue signal acquisition by 4 Simultaneous Sampling Input Channels is available.
24 bit D/A converter of ΔΣ method is used.
The input formats generally supported are Charge Input and IEPE Input besides Voltage
Input.
(Voltage Input, Charge Input and IEPE Input are changeable on the software.)
IEPE input supports the TEDS function.
Monitor Output Terminals are provided for every input channel.
<Output>
Analogue signal output including the excitation control drive signal for 4 Output Channel
is available.
24 bit D/A converter of ΔΣ method is used.
<Common Items>
Maximum Sampling Frequency is 51.2 [kHz].
Each Input/Output circuit is protected by the relay device.
Remote Control Contact I/O function is available as a communication function to external
equipments.
K2ST-23-011
ch1
ch2
ch3
ch4
ch1
ch2
ch3
ch4
INPUT
OUTPUT
!