7 - 10
＜Step 5＞
The screen noticing the startup of application appears.
After the application is started, test files are read in, and the hardware initialization is automatically
complete. As for the later operation procedures, refer to the instruction manual of applications.
Note) Main errors during execution
• When definition error occurs
After application is started up
*
, definition error occurs, and the definition is completed.
• In case there is application of which test is being executed
After application is started up
*
, execution start process fails, and the definition is completed.
There will be no influence on the test being executed.
*) If the same application is started up in the ‘Standards’ and ‘Test files’ modes, no more
application will be newly started up.
To Next Page
Loading...