Interacoustics affinity 2.0 - Knaster Testing Setup

Affinity
2.0
Additional Information Page 92
1.8.2.6 Knaster Te sting
23
Setup
Startup
To enter the Startup options for Knaster testing unfold the Knaster options and click Startup. The default
Talk back level can set using the check box (as described in section 1.7.2.4).
Common
To enter the Common options for Knaster testing unfold the Knaster options and click Common.
1) Under Channel 1 select output and input using the dropdown lists. Select the desired ear of
presentation and if the test should be conducted through Mic1, Mic2, CD1, CD2, or Wave files.
Channel 1 Output Channel 1 Input
23
Knaster requires an additional software license and is only available for the Affinity
2.0
/Equinox
2.0