Interacoustics affinity 2.0 Additional Information

Affinity
2.0
Additional Information Page 3
1.2.2 Launching AC440 from Noah
Ensure that the Affinity is switched on and connected before opening the software module. If the hardware
is not detected, a dialog box will appear asking if you want to run the Affinity Suite in Simulation mode.
To start the Affinity Suite from Noah 4:
1. Open Noah 4
2. Search for and select the patient you want to work with from the left-hand side of the screen.
3. If the patient is not yet listed:
- Click on the Add a New Patient icon
- Fill in the required fields and click OK
4. Click on the Affinity Suite module icon at the top of the screen.
For further instructions about working with the database, please see the operation manual for Noah 4.

Interacoustics affinity 2.0 Specifications

General

Brand	Interacoustics
Model	affinity 2.0
Category	Medical Equipment
Language	English