Interacoustics affinity 2.0 Additional Information

Affinity
2.0
Additional Information Page 2
1.2 Launching AC440 with Databases
1.2.1 Launching from OtoAccess™
Ensure that the Affinity is switched on and connected before opening the software suite. If the hardware is
not detected, a dialog box will appear asking if you want to run the Affinity Suite in Simulation mode, similar
to the following:
To start the Affinity Suite from OtoAccess™:
1. Open OtoAccess™
2. Select the patient you want to work with by clicking on it; it will then highlight blue to indicate
selection.
3. If the patient is not yet listed:
- press the New client button
- fill in at least the mandatory fields, marked with a red asterisk.
- save the patient details by pressing the Save patient information button.
4. Double click on the Affinity Suite in the Select Instrument box.
For further instructions about working with the database, please see the operation manual for OtoAccess™.
2
3
4

Interacoustics affinity 2.0 Specifications

General

Brand	Interacoustics
Model	affinity 2.0
Category	Medical Equipment
Language	English