Affinity
2.0
Additional Information Page 272
3 HIT440
3.1 HIT440 Quick Guide
1) Open Noah and select the patient you want to work with:
2) Select the Affinity module from the Noah Module menu
3) Select the HIT Icon in the upper right corner of the screen:
IMPORTANT NOTE: The hearing instrument needs to be in FULL ON GAIN MODE/TEST MODE in
order to compare the results to the hearing aid manufacturers’ technical data sheets. Each hearing
aid manufacturer has a different way of accessing this Test Mode. Please check with the hearing aid
manufacturers for instructions on how to program the hearing aid into TEST MODE.
To Next Page
Loading...
