Interacoustics affinity 2.0 Additional Information

Affinity
2.0
Additional Information Page 108
1.8.2.3 SIN Test Setup
Startup
To enter the Startup options for SIN testing unfold the SIN options and click Startup.
1) Select the default output for Channel 1 from the dropdown list.
2) Select the default output for Channel 2 from the dropdown list.
3) The Talk back level can be determined using the check box.
4) The Default SNR section allows you to specify the start SNR level for your testing.

Interacoustics affinity 2.0 Specifications

General

Brand	Interacoustics
Model	affinity 2.0
Category	Medical Equipment
Language	English