Interacoustics affinity 2.0 Additional Information

Affinity
2.0
Additional Information Page 111
1.8.5 Changing a Test Protocol Temporarily
You may from time to time run into a patient with special needs requiring advanced or different testing
parameters. In this situation the Temporary Setup can be helpful. The setup changes made here will be
specific to the particular session. The test protocol name will be supplemented with an asterisk (*) to indicate
that changes have been made to original test protocol. After saving the protocol will change back to the
default selected protocol making you ready for your next patient.
1) Enter the Temporary Setup by clicking the button in the front screen
(or alternatively select
Menu/Setup/Temporary setup).
2) The Temporary Setup is identical to the AC440 setup. However, functions that cannot be changed
temporarily will be greyed out.
Browse the setup options to make temporary changes as if creating a test protocol (see section 1.7.2).

Interacoustics affinity 2.0 Specifications

General

Brand	Interacoustics
Model	affinity 2.0
Category	Medical Equipment
Language	English