Interacoustics affinity 2.0 - Finishing the Test Protocol; Changing a Test Protocol Permanently

Affinity
2.0
Additional Information Page 237
2.6.5 Finishing the Test Protocol
Press OK in the lower right hand corner of the AC440 setup screen to save the customized test protocol. The
test protocol can then be found in the List of Protocols dropdown list on the front screen.
2.6.6 Changing a Test Protocol Permanently
You can at any time make changes to an individual test protocol by entering the REM440 setup again as
when creating the test (Menu/Setup/REM440 setup).
1) Choose your test protocol in the Selected protocol dropdown list.
1