Interacoustics affinity 2.0 - RECD Using the Clients Own Ear Mould

Affinity
2.0
Additional Information Page 185
2.7.4.1 RECD using the client’s own ear mould
Additional required items:
 An ear mould
 A 2 cc coupler connected to an adaptor for the BTE. These click easily together.
1) Open the REM440 module by selecting the REM tab.
2) Select a test in the List of Protocols.
3) The RECD is most often used with children, so you will need to explain the procedure to the parents.
4) Ensure that the information about client, fitting prescription and hearing aid parameters to the right
are correct.
5) Click START and the screen below will appear.
4
5
Coupler Curve
1
Real-ear to Coupler Difference
Ear Curve
2
9