Interacoustics affinity 2.0 - Directionality Settings

Affinity
2.0
Additional Information Page 314
3.8.2.10 Directionality Settings
Settings for Directionality are identical to the settings described above for Frequency Response with the
exceptions listed below. Please refer to section 0 for details regarding the additional test settings.
1) Display result as:
 Response: Tick this option to have the measurement displayed in dB SPL.
 Gain: Tick this option to have the measurement displayed in dB gain.
Note: The Input selection options and Multiple curves are not available for Directionality.
1