Interacoustics affinity 2.0 - Setup of SKS10 in the Affinity Test Chamber

Affinity
2.0
Additional Information Page 267
3.6.3.4 Setup of SKS10 in the Affinity test chamber
Since the SKS10 contains an accelerometer, it needs to be powered by an external power source. Please
ensure that the SKS10 is connected to the power supply and the power supply is connected to a power
source.
1- Connect the skull simulator to the power supply and ensure power supply is connected to a power
source
2- Connect the white plug into the white socket inside the Affinity Test Chamber