Affinity
2.0
Additional Information Page 103
1.8.2.12 ABLB/Fowler and Stenger Setup
ABLB/Fowler and Stenger can be performed by adjusting the Tone or Speech settings in the front screen.
(see 1.7.2.2 section and 1.7.2.3).
1.8.2.13 TEN test
27
Setup
For your convenience, the TEN test can be selected as a pre-defined test protocol which is made according
to the methods of Brian Moore (see Appendix 3). Depending on which regional settings were selected during
the software installation, a TEN test protocol can be selected in the List of defined Protocols:
Note: If a TEN test protocol is not visible it can made available by selecting Menu | Setup | Show/hide
protocols.
27
TEN test requires an additional software license
To Next Page
Loading...
